1998 Ditch Witch JT2720 - SKU #9100-484

Img_8915_midsize Img_8916_midsize Img_8917_midsize Img_8918_midsize Img_8919_midsize Img_8920_midsize Img_8921_midsize Img_8922_midsize Img_8923_midsize Img_8924_midsize Img_8925_midsize Img_8926_midsize Img_8927_midsize Img_8928_midsize Img_8929_midsize Img_8930_midsize Img_8931_midsize Img_8932_midsize Img_8933_midsize Img_8934_midsize Img_8935_midsize Img_8936_midsize Img_8937_midsize Img_8938_midsize
  • Img_8915_thumb
  • Img_8916_thumb
  • Img_8917_thumb
  • Img_8918_thumb
  • Img_8919_thumb
  • Img_8920_thumb
  • Img_8921_thumb
  • Img_8922_thumb
  • Img_8923_thumb
  • Img_8924_thumb
  • Img_8925_thumb
  • Img_8926_thumb
  • Img_8927_thumb
  • Img_8928_thumb
  • Img_8929_thumb
  • Img_8930_thumb
  • Img_8931_thumb
  • Img_8932_thumb
  • Img_8933_thumb
  • Img_8934_thumb
  • Img_8935_thumb
  • Img_8936_thumb
  • Img_8937_thumb
  • Img_8938_thumb
Click The Image to Enlarge
1998 Ditch Witch JT2720
SOLD!
SKU: 9100-484
(52) USED 10' Drill Pipe
EZ Connect II Transition Rod w/ Collar
NEW Beacon Housing Assembly w/ Bit
Specifications
Year: 1998
Make: Ditch Witch
Model: JT2720
Hours: 3,063
Pullback: 27,000
Rotation: 3,500
Tell A Friend About This Equipment!

Service Record For SKU #9100-484

The following services and repairs have been performed on SKU #9100-484 by Source: HDD. You can always be confident in the gear you buy from Source: HDD!

- Complete Service (Oil, air, fuel, hydraulic)
- Service mud pump, pressurize drilling fluid system and check operation & for leaks.
- Installed NEW rotation motor
- Replaced front thrust chain idler sprocket, shaft, & bearings
- Replaced rod loader grippers
- replaced small plastic wire carriers for both the front and rear shuttle arms
- Installed NEW front slide wrench
- Replaced rear wrench plate
- Replaced both rod guide inserts
- Replaced carriage rotation shaft seals  & refill with fresh 80w90
- Replaced the rear slide wrench wear pads
- Replaced front E stop button
- Replaced rotation press gauge